What to Do When duplicate motorcycle keys Lose a Motorbike Key
If you lose your motorbike key, it can be an incredibly frustrating situation. If you're not sure what to do, it could keep you in limbo for weeks particularly if you're using it as the sole means of transportation.
There are several different ways to get a brand-new motorcycle key made. Most of them are inexpensive and quick, however some require a visit to your dealership.
1. Unhook the Ignition Cylinder
The ignition cylinder is an essential element of the engine. Motorbikes can have problems starting when the cylinder is damaged. The cylinder has a lot of wires and crucial elements that help the ignition function. You'll need to replace the cylinder in the event that it isn't functioning correctly.
The first step you need to do is disconnect the ignition cylinder from your motorcycle. This is a relatively easy task that can be accomplished by anyone with the proper tools and experience.
To unhook your ignition cylinder first, you'll need to unhook the upper triple clamp. It's a relatively simple procedure that involves removing handlebar halves , and then releasing the upper triple clamp from the fork tubes.
After removing the handlebars then you can make use of a 22mm socket for loosening the pivot bolt. This bolt is a large one that connects the top triple clamp to the bike. You'll also have to remove the bullet connector from the top triple clamp in order to get it free of your bike.
To avoid any damage, you will need to work in a clean space. To protect your body and help you to keep track of what's taking place, lay sheets or towels on the floor.
It is a good idea after removing the lower triple-clamp to determine the location of the bars and the fork tube in the triple clamp. This will allow you to put them back in the same manner once the new triple clamp has been installed. This will make it easier to put the fork tubes or bars in the correct places even if you did not do everything right when you put in the upper triple clamp.
Next, unhook the ignition switch and wiring harness. You must unplug the bullet connector and disconnect the plug that is large.
This step is essential should you decide to take the fairing cap off of your motorcycle prior to starting. This will give you more space to work in.
2. Take the Key Code to a Locksmith
A key code is a series of letters and numbers that represent the characteristics of a lock. Locksmiths utilize key codes to make new keys and to repair or replace locks.
They are typically made up of a combination of numbers and digits, however, they may also include letters. These numbers are essential to ensure that the locksmith produces a lock key that works for you.
In the majority of cases locksmiths have access to many different key codes that can be used to create new keys. Some locksmiths convert the codes into keys using computers. Others prefer large reference manuals for determining the code they need to cut an entirely new key.
There are two types of key codes that the majority of locksmiths utilize to create new keys. The first is a blind code which identifies the specifications of the lock by using numbers and a combination number. The second type of code is called a direct-digit code. It has numbers that show the dimensions of the lock as well as the cutting patterns.
To create a new key from an existing code, locksmiths must either scan the code by using small cameras or tools to visually determine the cut lines on the key or make use of a code cutter make a precise cut key. Both methods of converting a key code create the key with a new function that can be used in your lock.
Locksmiths might need to stamp the lock or take apart the lock before they are able to begin the process of cutting codes. This can take a long time and requires a lot of skill, but it can be accomplished with practice.
Before they arrive at the job the best locksmiths can assess the requirements of the customer. They will then determine the method that will be most effective for them.
If the client has trouble understanding the lock code, locksmiths may employ the technique of impressioning to find the pins within the lock cylinder. Once they've mastered this technique, they'll mark the blank of a key with these locations. This could take between 10 and 15 minutes.
3. Take the key to an agent
A lost key for your motorcycle could be a significant inconvenience. You could have to pay for a flatbed , an Uber, or buy a new key from the dealer. It's not necessary to lose your key to put an end to your bike's existence. There are ways that you can protect your bike and yourself.
Keep an extra on your bike in a safe location. You can also offer it to a family member or friend in case you lose your original. This will give you some time to obtain an alternative in the event of a theft or breakdown.
A Bluetooth key finder is also available. It will inform you when your keys are near, so you don't need to be concerned if it gets lost or stolen. If you are prone to losing keys, this might aid in avoiding them.
Another option is to contact your bike manufacturer and request a copy the key code. This code is typically printed on the key itself or on a metal tab attached to the key. If you find this number, it is the quickest way to get the new key manufactured and delivered to you.
It is a good idea to keep your VIN (vehicle ID number) written down so you are able to bring it with you when you call the dealer. Some dealers will require this information in order to have a key cut for your and may also require proof of ownership before they do so.
Using the right key will also save you money in the long run because it will save you the expense of having your bike repaired or fixed. Many manufacturers offer keyless locks, which are more convenient for those who don't own locks that are traditional on their bikes.
If you're someone who doesn't know where you place your keys, consider putting them in a waterproof container or inside your coat or jacket pocket. This will be much easier to locate, and will also help keep your bike safe while you wait for a replacement key.
4. Lock the door
There are a number of simple ways to get the keys to your motorbike. These methods are not permanent however they can help you save money and time by allowing you continue to use your bike should you have to employ locksmith.
First, check the lock to determine whether it's broken or jammed by debris. If it is then give the inside of the lock a good spray with WD-40 to get rid of any dirt that may be stuck. After the WD-40 is gone it is time to try inserting the key again and test whether it works.
Another possibility is that the discs in the lock aren't aligned correctly. This could cause the key to not turn completely. In this situation you'll have to gently rotate the nuts using a screwdriver to open them.
Next, you can try to unlock the lock with the lock picking tool. This technique is commonly used to open locks with high-end components, but it can also be applied to locks that are less expensive. The most important thing to do with this method is to be aware of your lock and pick it with care.
This method works best with It is best done using a Bic pen. It is compatible with U locks and can even be used to unhook the tubular lock's cylinder.
Another option is to make a shim from an empty coke container. This will assist in removing the wedge bolt from the bar end joint. This is particularly helpful if your lock is situated in the lower section of the handlebars and will allow you to take off the handles without difficulty.
If the shim method fails you may try using a knife to open the lock. This method that is old and destructive may work in some cases however it could cause damage to your bike.
To prevent this from happening, make sure to wear protective gear. When working with sharp metals such as a shim glasses and gloves are essential.
If none of these solutions are working, it's time to call a professional. A locksmith with experience can help you unlock your lock and get your bike working again.